Hey all, it's been long since I wrote on expat forum. Does anybody here have an experience of getting assessed an engineering technologist in the past and then upgraded to professional engineer after that? I am in a totally strange situation that I have accepted engineering technologist in the...
Hi everyone, has anyone got any experience with or advice on the following;
My degree is accredited under the Sydney Accord therefore a MSA if successful would have the outcome of an Engineering Technologist. Having read through the forums it seems a very competitive category due to low number...
i studied as a mechanical engineer in university and did a post graduate diploma to work as a marine engineer.
I have worked as a MARINE ENGINEER in a Norwegian shipping company for a total of 37 months so far.A little above 3 years.
The ANZSCO code 231312 is eligible to apply for...
I have updates my EOI for SC 189 today (13th November, 2020) claiming 95 Points.
Do you have any idea idea by when should I expect my invitation? I will be very thankful for your advice.
Points Distribution as below:
PTE 79 Each: 20
Bachelors Degree: 15
2 Yrs Australian Study...
Can anyone please advise me on invitation?
what are the chances of invite in my case?
EOI Lodged on 23/09/2020
Engineering Technologist 233914 with 90 Points.
Age, 30 points
Education, 15 points (Overseas Engineering Degree)
PTE 79 Each, 20 points
I am completing my PhD degree in Electrical Engineering from Australia. I am planning to enter into the immigration process and first thing will be the skill assessment. I completed my Bachelor's of Computer Engineering from Dept of Electrical Engineering, then completed my Masters by Research +...
I am completing my PhD degree from Canberra ACT. I want to know the process and from the research what i understand is First I have to prepare CDR to get the skill assessment of Engineering technologist and then apply for ACT state nomination and last using the skill assessment apply for...
Can somebody please help me in this regard.
I submitted my CDR for assessment as an Electrical Engineer. However, the outcome was Engineering Technologist.
I don't want to go for review as its time consuming and the outcome is still not guaranteed.
I want to apply for assessment...
Kindly help me regarding my skill assessment for claiming 5 points. I did bachelors in telecommunication engineering and applied for the professional Engineer assessment to engineers Australia. Later i got an outcome as Engineering Technologists from them based on my experience...
I intend to apply for Engineering Technologist assessment. I hold a Bachelor degree of Prospecting Skills and Engineering from my motherland and a Master degree of Geoscience in Australia.I don't have any working experience after graduation. And the core courses in my...
I qualify under Sydney accord for engineering skills assessment by Engineers Australia.
Without CDR I can apply under technologist. What are the benefits of applying
to professional engineer over technologist?In terms of invitation time and visa approval rate etc..
thanks in advance
Hi good people,
I have submitted NSW 190 EOI on 23rd January 2017 with 70 points, 10 points from PTE AnZSCO code 233914, engineering technologist. I actually don't know the how much time may take for invitation. Would you please have a guess that the speculative time line for state invitation...
I want to get my qualifications assessed by Engineers Australia.I have completed my Bachelors degree and Masters degree in science(Chemistry) not in Engineering. I have no experience. I'm planning to apply for Chemical Engineer or Engineering Technologist occupation category , as they both...
I am a 2nd. Semester Student at UNSW(Master of IT). I am planning to apply for PR.
Bachelors degree was in Computer Science and Engineering from India(Washington Accord Accredited University).- 15 points
I have no work experience. - 0 points
I have a TOEFL score of 108/120.(Planning to...
During my last communication with my assessor, they advised that the potential outcome of my application is engineering technologist (ET) since the requirements in the competencies 2.1, 2.2, and 2.3 have not been met.
I replied saying that I have written 21 paragraphs on these 3...
I have recently completed 60 points as Engineering Technologist 233914 which are broken as follows:
Degree: 15 Engineering Technologist
Australian 1 Yr Experience: 5
Total : 60
Can anybody guide me about the probability of getting invitation?
I have recently claimed my 1 year Australian Experience as Engineering Technologist 233914. I also have skill assessment as Telecom Engineer as well.
My current points are distributed as under:
Age 29 yr: 30 points
Degree: Engineering Technologist or Telecom Engineer: 15 points
I'm interested in applying for Migration Visa 189.
My qualification (3 year Mechatronic Engineering), is recognised by the Engineering Council (ieagreements.org) and also is recognised under the Sydney Accord as an Engineering Technologist.
However I have been working in the flexible...
Hope all of you are doing well.
I completed a BEng in Mechatronic Engineering (3 year course) and was a appointed as a graduate trainee for a one year before being appointed as an Assistant Engineer a little over 3 years ago. My technical domain could be best described as manufacturing...