View Single Post
  #2 (permalink)  
Old 15th March 2008, 09:21 PM
Big Pete Big Pete is offline
Banned
 
Join Date: Aug 2007
Posts: 538
Rep Power: 0
Big Pete will become famous soon enoughBig Pete will become famous soon enough

Default

Quote:
Originally Posted by orsolina View Post
Hi,
We moved to Carcassonne 6 months ago and had to replace our Central heating boiler. We had a Chaffoteaux Mira green fitted by a local plumber - for what seemed to us a huge amount of Money €2,600!!!. Shortly after installation when we switched it on there was a loud explosion and there in after we had problems with it including the boiler being very noisy. (We discovered at this point that the mounting was not level and wondered if this could have contirbuted to the problem.) Eventually the chap from Chaffoteaux came to check it out and fobbed us off. After a great deal of agonising too-ing and fro-ing with the plumber and Chaffoteaux via their website our plumber rang up and announced triumphantly that he was coming to fit a brand new boiler.
He duly arrived with a new boiler in a box, saying that he had insisted that chaffoteaux replace it. We pointed out our concerns that the mounting was not level and again felt we were being fobbed off with "We'll see". After 2 hours the new boiler was up, the plumber was ready to go and asked for the balance of his bill. We declined until we had evidence that the boiler was now in a good working condition.
Later on closer inspection we discovered that in fact - we still have the same boiler - or at the very least half the same boiler. The casing and lower part are definately the same - same serial numbers, scratches etc. The mounting is still not level and it is still noisy - though not quite as noisy as before.
It is all beginning to feel a bit surreal and we are struggling with what to do next.
Does any one have any suggestions? Is there a local trading standards body in France that deals with this kind of thing?
Hi

I am not to familier with that model , but it is very important to have the burner assembly level !!

If you imagine holding a flame up it will always burn upright , if the burner housing is crooked it will be burning alongside the body rather than its designed centre ..

So you should insist thats its mounted squarely.. This will cause long term problems else .. and could explain the problems your having .
Reply With Quote